The operation steps of the rope making machine are as follows: put it on the horizontal ground, connect the power supply, check whether each transmission is normal, and lubricate each transmission part appropriately. Start the motor and check whether the running direction is consistent with the indicated direction. If not, turn off the power supply and replace the two wires of the capacitor and the motor, which can be consistent with the indicated direction.
Step 2: take an appropriate amount of the prepared straw and insert it into the two feeding mouths of the machine, and then go through the rope mouth to between the two rope pulleys.
Three steps: after the power is turned on, the production can be completed by continuously inputting straw with the original forage.
Four steps: when the rope reel is full, turn off the power supply of the rope making machine, cut the straw rope near the wooden disc, remove the wooden disc, remove the straw rope bundle, and after installing the rope reel, wrap the original rope head on the wooden disc to restart production.
