Binding Band Machine

Product Detail

The high-quality finishing tape rolls up from the appearance into a cylindrical shape with straight cuts on both sides. The winding pattern is clear and dense, the surface is straight and flat, and the body is soft, feels good, symmetrical and does not entangle like a manual tape. . On the other hand, if the belts with poor quality are not exactly on both sides, there may be a phenomenon that the joints or the folds are not good in the gaps. With the end of the joint, because the joint part is in a lump shape, it will cause the conveyer belt to be blocked and broken during use. Over time, it will seriously damage the beak, gear, and blade of the knotter.

In particular, the 50# end band is more troublesome in the use of the automatic strapping machine assembly line. It is often necessary to stop wearing the belt again, which will seriously affect the normal operation of the entire production line. Folding is not good, and the end of the curl is loose. In the binding process, it often slips on the periphery of the barrel itself and wraps around the bottom, resulting in the belt not being pulled or being broken. This condition will cause the conduction band to bend and deform, and the strapping machine will not work properly. A badly folded strap can easily cause the blade to not cut the strap completely, resulting in a dragging phenomenon. Long-term use will certainly damage the machine. The winding is smooth, and the ends of the hem are symmetrical and even. Because of their own static electricity, they are naturally attached to the column and do not fall on the ground. The use of natural smoothness is smooth.